Your heat transfer partner in Asia since 1996.

Vitherm Asia clinched an order from our loyal clients in the petroleum industry. Both heat exchangers will be installed in a Middle Eastern refinery.

The equipment are a glycol regeneration cooler and a lean/rich glycol exchanger. The glycol dehydration system is a crucial refinery process that removes saturated water vapour from natural gas using glycol. Our heat exchangers will provide heat transfer for the glycol fluids.

Vitherm welded heat exchangers will be used for this heat recovery process. Their proven mechanical strength gave Vitherm Asia a competitive edge. Easy accessibility makes 100% cleaning possible, while the Vitherm Asia plate pattern supports extensive, trouble-free operation.

Vitherm Asia proudly announces a momentous achievement in winning a prestigious order from a satisfied customer in the chemical industry in the USA. One regeneration unit was supplied for this project.

During the regeneration process of MEG (monoethylene glycol), Vitherm Asia’s innovative solutions enable the recovery and utilization of waste heat from high-temperature lean MEG, condensate water or reflux. This recovered heat is then used to heat the rich MEG, improving energy efficiency and reducing operating expenditure (OPEX).

Vitherm Asia’s plate heat exchangers are built on cutting-edge technology and set new industry standards. Advanced plate designs maximize heat-transfer efficiency, ensuring rapid and effective MEG regeneration. Vitherm Asia’s pursuit of technical excellence delivers superior performance and optimized customer operations.

Proven mechanical strength gives Vitherm Asia an advantage over competing solutions. Easy accessibility makes 100% cleaning possible, while the Vitherm Asia plate pattern supports extensive and trouble-free operation.

Vitherm Asia clinched an order for the supply of another unit for a refinery in Taiwan. This motive fluid cooler will be part of the Flare Gas Recovery System (FGRS), a process that recovers waste gas that would otherwise be flared. Reusing this fuel gas elsewhere in the facility is both economical and helps reduce emissions.

A Vitherm welded heat exchanger will be used for this heat recovery process. Its proven mechanical strength provided a competitive advantage. Easy accessibility makes 100% cleaning possible, while the Vitherm Asia plate pattern supports extensive and trouble-free operation.

Vitherm Asia clinched an order for the supply of one unit for a plant in Singapore. The plant focuses on producing 100% bio-sourced polyamide for critical applications including electronics, 3D printing and oil and gas extraction.

The Vitherm Asia heat exchanger is mainly used for cooling in the plant process. A welded heat exchanger was selected for its proven mechanical strength, full accessibility for cleaning and plate pattern designed for extensive, trouble-free operation.

Crude Palm Oil (CPO) is processed either by physical or chemical refining, subsequently producing RBDPO or NBDPO: refined or neutralized, bleached and deodorized palm oil. These products are then subjected to fractionation to obtain liquid olein and solid stearin fractions. For edible oil processing, dry fractionation is widely used because it is the most economical methodology.

Vitherm welded heat exchangers will be used mainly in the pre-heating, economizer and steam-heater sections of the plant. Vitherm Asia was selected for its track record in the palm oil industry.

WeldPack®’s strong and unique column and plate-pack design helps avoid leakage at the corners. Easy accessibility also makes 100% cleaning possible, while the Vitherm Asia plate pattern supports extensive and trouble-free operation.

Vitherm Asia is thrilled to announce a significant milestone as we secure a prestigious order from a highly satisfied customer in the chemical industry based in Taiwan. 10 units were supplied for this project for various uses.

In the carbonate absorption process, a lean carbonate solution is used to absorb carbon dioxide (CO2) from a gas stream, resulting in a rich carbonate solution. The lean carbonate solution, after absorbing the CO2, becomes rich in CO2 and requires regeneration to release the absorbed CO2 and restore its original composition.

The purpose of these heat exchangers is to enhance the thermal efficiency of the carbonate absorption process, minimize energy consumption, and optimize the temperature profiles of the carbonate streams. This contributes to cost savings, improved process performance, and reduced environmental impact by maximizing the utilization of heat energy within the system.

With proven track records of its unique mechanical strength, Vitherm Asia has the cutting edge over other competitors. It also allows easy accessibility, hence making it possible for 100% cleaning due to the pattern on Vitherm Asia plates, giving extensive and trouble-free operation.

Crude Palm Oil (CPO) is processed either by physical or chemical refining, subsequently producing refined or neutralized, bleached and deodorized palm oil. Further fractionation produces liquid olein and solid stearin fractions. For edible oil processing, dry fractionation is widely used because it is the most economical methodology. This unit will heat palm oil using steam.

Vitherm welded heat exchangers are used mainly in the pre-heating, economizer and steam-heater sections of the plant. Vitherm Asia was selected for its track record in the palm oil industry.

WeldPack®’s strong and unique column and plate-pack design helps avoid leakage at the corners. Easy accessibility makes 100% cleaning possible, while the plate pattern supports extensive and trouble-free operation.

Vitherm Asia clinched an order for the supply of multiple units in a major refinery in China. The units will be used in a gas-processing plant for heat recovery using Natural Gas Liquid (NGL), together with multiple coolers for liquefied petroleum gas.

Vitherm welded heat exchangers will be used for this heat recovery process. Their proven mechanical strength provided a competitive advantage. Easy accessibility makes 100% cleaning possible, while the Vitherm Asia plate pattern supports extensive and trouble-free operation.

Vitherm Asia clinched another order from a satisfied customer in Taiwan’s petrochemical industry. The motive fluid cooler is an integral part of the customer’s Flare Gas Recovery System (FGRS), recovering waste gas that would otherwise be flared.

Reusing the recovered fuel gas in another part of the facility is economical and reduces emissions. A Vitherm welded heat exchanger was selected for its mechanical strength, full accessibility and ability to be completely cleaned for trouble-free operation.

Vitherm Asia recently clinched an order for the supply of another unit for a steel company in Taiwan. This is a repeat order from a satisfied customer in the steel and mining industry. The Hastelloy® heat exchanger is used in a heat recovery system.

A Vitherm welded heat exchanger will be used for this heat recovery process. Its proven mechanical strength provided a competitive advantage. Easy accessibility makes 100% cleaning possible, while the Vitherm Asia plate pattern supports extensive and trouble-free operation.

Upholding quality and maintaining customer satisfaction remain Vitherm Asia’s highest priorities.

Vitherm Asia recently clinched an order for the supply of 10 units for a refinery in China. The petrochemical facility’s major production is Methyl Tertiary Butyl Ether (MTBE), with recent expansion into new gasoline blending. The Vitherm Asia units are mainly used as regeneration heat exchangers throughout the plant process.

Vitherm welded heat exchangers will be used for this heat recovery process. Their proven mechanical strength provided a competitive advantage. Easy accessibility makes 100% cleaning possible, while the Vitherm Asia plate pattern supports extensive and trouble-free operation.

Vitherm Asia clinched an order for the supply of 14 units for a plant in Singapore. The plant produces 100% bio-sourced polyamide for critical applications including electronics, 3D printing and oil and gas extraction.

The Vitherm Asia heat exchangers are mainly used for cooling throughout the extensive plant process. Their proven mechanical strength, accessibility for 100% cleaning and plate pattern support extensive and trouble-free operation.

Vitherm Asia secured another order from a satisfied customer. This feed preheater will be used in the customer’s ethylene plant. The facility is one of the region’s main producers of ethylene and propylene.

Ethylene plants represent the first stage in transforming part of natural gas, including ethane, into base products used in plastics, cosmetics and solvents within the petrochemical industry.

A Vitherm welded heat exchanger will be used for this heat recovery process. Its proven mechanical strength provided a competitive advantage. Easy accessibility makes 100% cleaning possible, while the Vitherm Asia plate pattern supports extensive and trouble-free operation.

Vitherm Asia has been awarded another order for a petrochemical plant in Singapore. Vitherm Asia secured this new order from a satisfied customer.

The customer is one of the region’s leading producers of ethylene and propylene. Ethylene plants form an early stage in transforming natural gas, including ethane, into base products used in the petrochemical industry for applications such as plastics, cosmetics and solvents.